Pipe Fittings for Distributors and Dealers – the part others cannot deliver
You have the order – and need a manufacturer who can reliably execute the difficult items. Non-standard dimensions, special materials, heavy-wall designs, short lead times. Nirotec has been a supply partner for distributors and dealers in Europe for over 35 years – discreet, reliable, and with the necessary documentation.
What Distributors Find at Nirotec
In the specialized trade for piping components, there are items that are difficult to procure – because the dimensions fall outside the standard range, the material is special, or the documentation requirements exceed normal stock trading. This is precisely where Nirotec is the right partner.
Typical inquiries from distributors:
- Heavy-wall pipe fittings outside stock dimensions
- Special materials such as Duplex, Super Duplex, 6Mo, or nickel alloys
- Small lot sizes and custom fabrications to drawing
- Components with elevated testing and documentation requirements (3.1 / 3.2 certificates, PMI, NDT)
- Short-term deliveries for ongoing projects
What Nirotec Provides for Distributors
Nirotec supports specialized dealers and distributors in the complete execution of demanding project items – from technical clarification and material selection through manufacturing and testing to complete documentation. Upon request, delivery is discreet and with neutral shipping documents. This enables reliable execution of special requirements with as few interfaces as possible.
- In-house manufacturing for non-standard dimensions, special materials, and drawing parts
- Targeted procurement for standard items within a project
- Complete documentation – certificates, test reports, traceability
- Seaworthy packaging upon request
- Discreet delivery upon request – neutral shipping documents available
- No minimum order quantity for special parts
Typical Products
Available to EN 10253, ASME B16.9, and project-specific drawings – in all common nominal sizes, wall thicknesses, and materials.
Materials:
Our products are manufactured from a wide range of industrial materials. Depending on application, temperature, pressure, and corrosion requirements, we supply components from different material groups.
Additional materials and project-specific material requirements upon request.
Unalloyed & low-alloy steels:
P235GH / 1.0345
P265GH / 1.0425
P355GH / 1.0566
L360 / 1.0582 / API 5L X52
L415 / 1.8972 / API 5L X60
WPB / A234 WPB / Carbon Steel
WPHY70 / A860 WPHY70
Low-Temperature Steels:
WPL3 / A420 WPL3
WPL6 / A420 WPL6
LF2 / A350 LF2
P355NL2
P460NL2
10Ni14
12Ni14 / 1.5637
Heat-resistant steels:
16Mo3 / 1.5415
WP11 / P11 / 1.7335 / 13CrMo4-5
WP22 / P22 / 1.7380 / 10CrMo9-10
WP91 / P91 / 1.4903 / X10CrMoVNb9-1
WP92 / P92 / 1.4901 / X10CrWMoVNb9-2
X20 / 1.4922 / X20CrMoV11-1
WB36 / 1.6368 / 15NiCuMoNb5
Austenitic Stainless Steels:
304 / 1.4301 / X5CrNi18-10 / V2A
304L / 1.4307 / X2CrNi18-9 / TP304L / WP304L
316L / 1.4404 / X2CrNiMo17-12-2 / TP316L / WP316L / V4A
316Ti / 1.4571 / X6CrNiMoTi17-12-2 / TP316Ti / WP316Ti
321 / 1.4541 / X6CrNiTi18-10 / TP321 / WP321
347H / 1.4912 / X7CrNiNb18-10 / TP347H / WP347H
310S / 1.4845 / X8CrNi25-21 / TP310S / WP310S
Duplex & Super Duplex
Duplex / 1.4462 / X2CrNiMoN22-5-3 / UNS S31803 / F51
Super Duplex / 1.4410 / X2CrNiMoN25-7-4 / UNS S32750 / F53
Super Duplex / 1.4501 / X2CrNiMoCuWN25-7-4 / UNS S32760 / F55
254SMO / 1.4547 / X1CrNiMoCuN20-18-7 / UNS S31254
Alloy 926 / 1.4529 / X1NiCrMoCuN25-20-7 / UNS N08926
904L / 1.4539 / X1NiCrMoCu25-20-5 / UNS N08904
Nickel alloys:
Monel 400 / 2.4360 / UNS N04400
Alloy 625 / 2.4856 / UNS N06625 / Inconel 625
Alloy 825 / 2.4858 / UNS N08825 / Incoloy 825
Alloy C-276 / 2.4819 / UNS N10276 / Hastelloy C-276
Alloy 718 / 2.4668 / UNS N07718
Alloy 800H / 1.4876H / UNS N08810
Alloy C-22 / 2.4602 / UNS N06022 / Hastelloy C-22
Copper-Nickel & Special Materials:
CuNi10Fe1,6Mn / C70600 / 90-10 CuNi
CuNi70/30 / C71500
Zirconium 702 / UNS R60702
Quality Testing & Documentation
Our documentation is structured so that it can be passed directly to the end customer – complete, traceable, and standards-compliant.
Typical services:
- Test certificates to EN 10204 (2.2 / 3.1 / 3.2)
- Positive Material Identification (PMI)
- Non-destructive testing (UT, RT, PT, MT)
- Hardness testing
- Dimensional inspection reports
- External inspections by TÜV, SGS, or customer inspectors
- Project-specific ITPs upon request
Applications & Industries
In Use Worldwide
Our pipe fittings, custom fabrications, and project-based supply solutions are used worldwide in demanding industrial projects – wherever high requirements for pressure, temperature, corrosion resistance, and documentation apply.
Energy and Power Plant Facilities
Nuclear Technology
Hydrogen and Energy Infrastructure
Chemical and Process Industry
Refineries and Offshore Facilities
Apparatus and Mechanical Engineering
Difficult item in your project?
Contact our sales team directly – we will quickly clarify whether and how we can deliver.